Basics
Having installed and completed the initial configuration of TrueNAS Scale next we need to consider storage. For a discussion of the various RAIDZ and mirrors, I would recommend this post. I have the following storage devices in my system: sdl and sdj are used as the boot pool so cannot
Utilities
1. Prerequisites You need to have PuTTY installed. You need to have a public/private key pair already generated. The public key needs to be installed on your device (TrueNAS Scale) 2. Configure PuTTY to use public/private key authorization. Start Putty and enter the IP address (or hostname) of
Basics
Note that SSH is considered insecure bur if you must log into the consle temotely then using keys is more secure than passwords. 1. Prerequisites If you have been following along you should have completed the initial install of TrueNAS Scale and the early configuration. All configurations of TrueNAS Scale
Basics
Network Settings <p>Having completed the <a href="http://192.168.0.55/wordpress/index.php/2024/03/20/installing-truenas-scale/">initial install</a> and rebooted the device you will again be presented with the GRUB boot menu.</p> <style&
Basics
TrueNAS SCALE is an open-source, Debian-based NAS (Network Attached Storage) operating system, designed for scalability, sharing, and protection of data. It's a versatile platform suitable for personal, small-business, and enterprise-level applications. In this blog post, we'll walk you through the step-by-step process of installing TrueNAS SCALE
Utilities
1. Prerequisites Install PuTTY on a Windows device. (Follow my guide here.) 2. Start PuTTYgen Start PuTTYgen (this will have been installed as part of the PuTTY install) 3. Choose the type of key to generate The choice here is between RSA and EdDSA, the trade-off is between performance and
Utilities
This post describes how to use PuTTY on a Windows PC to access a Linux device using the SSH protocol. 1. Install PuTTY PuTTY an be downloaded from here. Download the appropriate .msi file. (If you are not sure which version you require check out the FAQ here.) Install in
Uncategorised
Before adding Virtual Machines to TrueNAS a network Bridge is requiired to allow the VMs to access the local network. In your TruNAS GUI navigate to Network>Interfaces. I dentify which interface is curently connected to your network. In this example it is "eno2". Then click the